H0085 MRX-4X Kit

 <Technical Data>

+ Length----------------442mm

+ Width-----------------262mm

+ Wheel Base----------299mm

+ Tread (F/R)-----------216.2mm/202.5mm

+ Ｆ.caster Angle--------8.5°〜15.5° Adjustable

+ Gear Ratio-------------1st. 6.92:1/2nd. 5.52:1

+ Weight------------------N/A

　
　
　 + MRX-4X Kit photos
　 + Parts List
　 + Parts List w/picture 
 　+ Setting Sheet
 　+ Instruction Manual 8.19MB
　

   <New Parts for MRX-4X kit>

   H0136-B

 Rear Upper Arm

    H0140-B

 Rear Upright

    H0148-B

 Front Bulkhead
    H0149-B Rear Bulkhead
    H0188 Eccentric Hub
    H0189 Upright Spacer
    H0190 Brake Bracket
    H0191 Rear Lower Arm Mount
    H0374 Battery Holder FRP
    H0466-B Rear Body Mount
    H0475 Chassis
    H0560 Front Damper Stay
    H0561 Rear Damper Stay
    H0562 Damper Case
    H0571 Damper Parts
    H0775 Centrifugal Shoe
    H0776 Al. Pressure Plate
    H0777 Clutch Bell
    H0778 Fly Wheel
    H0779 Clutch Shoe (Yellow)
    H0780 Clutch set for MRX-4X
    H0858 Ball Link 6mm (S)
　

　

<Details of MRX-4X kit>

+ Rear Upper Arm (2mm Shorter)

+ Brake Bracket & Rear Upper Arm Mount for short
   rear upper arm.

+ Rear upright (Adjustable wheel offset)

+ Front bulkhead.  You can change the tension of
   the belt (5 different positions).

+ Rear bulkhead.  You can change the tension of
   the belt (5 different positions).

+ New Eccentric Hub.

+ 5mm New Rear Lower Arm Mount

+ New Battery Holder (FRP) & Chassis 

+ New Long rear body Mount Arm & Rear Body
   Mount Centering Parts

+ New Damper End Parts & Rear Damper Case
   as same as front.

+ F/R Damper Stay, Al. Spacer for rear wheel offset,
   Decal, Set-up sheet are included.

+ New Clutch System (3 pcs Centrigugal Shoe, 
   Aluminum  Pressure Plate)

　

*The contents are subject to change without notice due to product improvements and specification changes.

Copyright © 2007 Mugen Seiki Co., Ltd.. All rights reserved.