MRX-2 4WD setting sheet MUGEN SEIKI Ver.9903

MRX-2 4WD set up sheet                 MUGEN SEIKI  Ver.9903
Name: Kenji Osaka Date: 10/23-24/1999    Track: Hokusei Circuit
Engine: RX21SP JP Piug: 7Tf Fuel: Byron Body: Mugen Lola

Body Position :13 mm

Rear spoiler: 5 mm 

Head clearance:.......   0.5 mm Muffler: NOVA 086..   115 mm
Clutch bell clearance:  0.5 mm Servo Saver:use for Vector
* use Intake Silencer
Clutch spring adj.nut:(3.5) 1.2 mm
Track condition: Night Race
         
Front rebound stop +1 mm mm mm mm
Rear rebound stop/ +8 mm mm mm mm
  / / / /
Front damper piston 1.1X1      
   damper oil #600      
   spring Serpt.Yellow / / /
   spring adj. pos. 4.5 mm mm mm mm
Front track width 254 mm mm mm mm
  road clearance 6 mm mm mm mm
  camber angle -1.5°      
   toe 1°out      
   anti-sway bar
   upper arm pos. 2 mm mm mm mm
         
Rear damper piston 1.1X2      
   damper oil    #600      
   damper position  2 (Normal)      
   spring    Serpt.Yellow      
   spring adj. pos. 1.0 mm mm mm mm
Rear track width 263 mm mm mm mm
   road clearance 7 mm mm mm mm
   camber angle -2.5°      
   anti-sway bar 2.4      
   toe-in 1.5°      
         
Front tire type FAH37M      
    tire dia. (start) L67.5/R67.5 L/R L/R L/R
    tire dia. (finish) L/R L/R L/R L/R
Rear tire type FPH35M      
   tire dia. (start) L75/R75 L/R L/R L/R
   tire dia. (finish) L/R L/R L/R L/R
2speed gear  2st. 17/50 / / /
         2nd. 21/47 / / /
Roll-cut 1st. 33.4 mm mm mm mm
       2nd. 43.9 mm mm mm mm
Pulley A (25 or 26) 26      
Over drive ratio 0.997      
  Track traction % % % %
Result        
Best lap time (1L)        

+ Gear & Roll out + Over Drive Ratio Table