1/8 Scale Electric 4WD Racing Truggy MBX-7TR ECO 

>> MBX-7TR ECO Picture <<

MBX-7TR ECO kit have many high-end improvements in suspension, steering and drive train to create the ultimate 1/8th electric off-road truck.
Mugen Seiki concentrated on the making the suspension on the MBX7TR even better with new 16mm front and rear shocks that improve traction and better feeling on high grip conditions. The new shocks are also outfitted with new 1.4mm shock springs.  The new 1.4mm shock springs reduce chassis roll, increase traction, improve jumping and are more stability on bumpy tracks.  This means you can drive even harder than ever before!  The 7TR has a new 3mm A7075 hard-anodized chassis with increase side bends to increase strength and to give a more precise felling on all surfaces.  The MBX7TR uses the E2129 front upright, which has a trailing axle position to improve overall steering.  The steering Ackerman plate from the 7R buggy is also included in the 7TR to add more adjustability.  The servo saver spring was also update to the E2316 to improve the precision of the trucks steering dramatically.  The drive train of the MBX7TR has been changed and improved with the use of a new universal style driveshaft for both the front and rear of the truck. This greatly improves the feel of the truck on bumpy surfaces.  The universal driveshaftfs will make the overall drive train much smoother and will spin with less friction. 
MBX-7TR Eco Features:

♦ 3mm A-7075 hard anodized chassis
♦ Lightweight 46T spur gear
♦ Straight cut conical and ring gears
♦ Fully adjustable steering with new geometry, servo saver, and Ackerman plate
♦ Front/Rear 16mm hard-anodized threaded shocks with 3.5mm shock shafts and slim rubber boots
♦ 5mm A7075 aluminum front shock tower
♦ 4mm A7075 aluminum rear shock tower
♦ 5mm A7075 aluminum lower suspension mounts for optimized geometry
♦ Narrow wheel hub (11.5)
♦ Stylish cab forward body
♦ E2125-B revised lower front suspension arm
♦ Improved servo saver spring (E2316)

Differentials Oils:

Front - 10,000 wt Oil (B0317)
Center - 15,000 wt Oil (B0337)
Rear - 7,000 wt Oil (B0323)

Shocks and Springs:

Front - 650 wt Oil (B0348) / 1.4 L70/6.75T Spring (E2555) / 1.3 8H Taper Piston (E2525)
Rear - 650 wt Oil (B0348) / 1.4 L85/7.75 Spring (E2561) / 1.3 8H Taper Piston (E2525)

Download:

Parts list 6.41MB 
Exploded view 495KB
Setup sheet
199KB 
Instruction manual
9.16MB
Kit bag details 1.51MB
Option parts

Other necessary equipment:
2ch radio set for RC car (Transmitter, Receiver, Servo)/Batteries for Transmitter/Motor/ESC (Electric Speed Controller)/Batteries for RC Car/Charger/Body paint tools/Ties & Wheels
*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.

Copyright © 2015 Mugen Seiki Co., Ltd.. All rights reserved.